FAA orders recurring flight-control tests on select Boeing 737NGs
āĻĒā§āϰāĻāĻžāĻļ: āĻļāύāĻŋāĻŦāĻžāϰ āĨ¤ āύāĻā§āĻŽā§āĻŦāϰ ⧍⧧, ⧍ā§Ļ⧍ā§Ŧ
The US Federal Aviation Administration (FAA) has ordered operators of certain Boeing 737 Next Generation (NG) aircraft to conduct recurring tests of their digital flight-control systems, citing a potential safety risk involving incorrect spoiler-position data and unintended aircraft roll.
The airworthiness directive, AD 2026-23-04, was published on November 20 and will take effect on December 7. The FAA estimates that the requirement will affect around 300 US-registered aircraft, Airways Magazine reported on November 20, 2026.
The directive covers specified Boeing 737-600, 737-700, 737-700C, 737-800 and 737-900 aircraft identified in Boeing's safety advisory 737-BSA-22-001, issued on October 30. The FAA has not provided an airline-by-airline breakdown of the affected fleet.
Safety concern
The required checks involve the digital flight-control system's built-in test equipment, which maintenance crews will use to perform an aileron test.
According to the FAA, the underlying safety concern relates to spoiler-position data and the aircraft's autothrottle system. During cruise, the autothrottle monitors for a significant difference in thrust between the two engines.
Missing or incorrect spoiler-position information could prevent the monitoring function from activating. If one engine produces substantially more thrust than the other while the autothrottle remains engaged, the imbalance could cause the aircraft to roll without a pilot command.
The FAA warned that if the flight crew does not detect and correct the unintended roll in time, they could lose control of the aircraft.
Recurring inspections required
Under the directive, operators must carry out the tests at intervals specified in Boeing's safety advisory. If an aircraft fails a test, maintenance crews must rectify the fault and repeat the test until the system passes.
Where Boeing's advisory measures a compliance deadline from its October 30 issue date, the FAA requires operators to calculate the deadline from December 7, when the directive takes effect.
The FAA estimates that each test will require two hours of labour, costing about US$170 per aircraft. The estimated cost for one round of testing across the affected US fleet is US$51,000. The agency has not calculated the additional cost of repairing faults identified during the checks.
Comments open until January
The FAA issued the final rule without prior public consultation, citing the potential safety risk and saying there was insufficient time to seek comments and publish a final rule before the compliance deadline.
However, the agency is accepting comments on the directive until January 4, 2027.
The requirement applies to the specified US-registered aircraft covered by the directive; the published rule does not provide details of its impact on Boeing 737NG operators outside the United States.